Transition Training Syllabus - IFR Edition

Syllabus Overview

The IFR edition of the transition course is composed of 10 required lessons and 1 optional lesson. The course should take approximately 5 days to complete the required lessons and an additional half day to complete the optional BFR.

The training program includes instruction on normal and emergency procedures as well as proven standard operating procedures developed by UNDAF and Cirrus Design. Aeronautical decision making (ADM) and effective risk management will be major emphasis areas, while maintaining the highest level of safety.

Course Overview

Lesson 1: : This ground lesson will be an introduction to scenario-based training and Cirrus transition training. It will include a review of pre-training materials including model-specific and IFR topics, and a session on the ground in the aircraft to work on avionics familiarization.

Lesson 2: This flight lesson is an introduction to the operational characteristics of Cirrus aircraft. The focus will be on maneuvers in addition to takeoffs and landings in various configurations and situations.

Lesson 3: This flight lesson is an introduction to normal VFR procedures and some Basic Attitude Instrument Flying (BAIF) in Cirrus aircraft. It consists of a 3-leg cross country in which the Cirrus pilot will implement normal procedures including checklists, enroute procedures, and arrival procedures. Instrument approaches will be conducted visually to acquaint Cirrus pilots with basic instrument procedures while using the autopilot.

Lesson 4: This flight lesson is an introduction to basic instrument procedures. The Cirrus pilot will conduct various types of instrument approaches under simulated or actual instrument conditions. Both hand flying and autopilot usage will be accomplished.

Lesson 5: During this flight lesson, the Cirrus pilot will continue to develop basic instrument skills while being introduced to advanced IFR procedures. It consists of a 3-leg cross country in which the Cirrus pilot will conduct en route procedures, arrival and departure procedures, and holding procedures. Practice with and without the use of the GPS/FMS will be accomplished.

Lesson 6: During this flight lesson, the Cirrus pilot will be introduced to abnormal and emergency procedures while in simulated instrument conditions. It consists of a 3-leg cross country flight.

Lesson 7: This flight lesson will focus on systems malfunctions while in simulated instrument conditions. It consists of a 3-leg cross country that will emphasize proper ADM and risk management while generating acceptable solutions to simulated malfunctions of various aircraft systems.

Lesson 8: This flight lesson will focus on avionics malfunctions while in simulated instrument conditions. It consists of a 3-leg cross country that will focus on simulated abnormalities with the PFD, MFD, autopilot, and GPS receivers.

Lesson 9: This flight lesson will give the Cirrus pilot a chance to apply all his/her knowledge by conducting an IFR scenario. This scenario will be modeled after Line Oriented Flight Training (LOFT). The lesson will also serve as a review lesson that will give the Cirrus pilot a chance to enhance his/her skills to prepare for the final evaluation and IPC.

Lesson 10: This flight lesson is the final evaluation flight. The flight consists of a 3-leg cross country in which the Cirrus pilot will demonstrate the knowledge and skill required to safely fly the Cirrus aircraft in single pilot IFR operations. The content of this lesson is modeled around scenario based training and includes all tasks required by the FAA Instrument PTS to complete an IPC. Note: The instructor is responsible for ensuring the Cirrus pilot meets acceptable standards in all subject matter areas, procedures and maneuvers included in the tasks within the appropriate instrument rating practical test standards required for an IPC.

Lesson 11: OPTIONAL. Flight Review.